| Last Modified: 11-29-2007 | 1.6 G | |
| Service Category: Vehicle Interior | Section: Lighting (int) | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003G5U000X |
| Title: LIGHTING (INT): VANITY LIGHT: INSPECTION (2008 Sequoia) | ||
INSPECTION
1. INSPECT VISOR ASSEMBLY LH
|
(a) Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1. |
(b) Check that the vanity light comes on.
OK:
|
Measurement Condition |
Switch Condition |
Specified Condition |
|---|---|---|
|
Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 |
A |
Vanity light comes on |
|
B to A |
Vanity light gradually becomes brighter |
|
|
B |
Vanity light turns off |
If the result is not as specified, replace the visor assembly LH.
2. INSPECT VISOR ASSEMBLY RH
|
(a) Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1. |
(b) Check that the vanity light comes on.
OK:
|
Measurement Condition |
Switch Condition |
Specified Condition |
|---|---|---|
|
Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 |
A |
Vanity light comes on |
|
B to A |
Vanity light gradually becomes brighter |
|
|
B |
Vanity light turns off |
If the result is not as specified, replace the visor assembly RH.
|
|